We sell everything you need to put together more heavy duty brewing systems such as plumbing, temperature control units, heat exchanges, elements, grain mills and pumps as well as all-in-one units like The Grainfather.
Brewing Equipment
-
My Store Hop Sock
These polyester mesh bags are perfect for small grain additions or for hopping beer. This is a tube of fabric that is 15cm wide and 75cm long. Both ends are open for easy cleaning and can simply be tied closed while being used. Perfect for grain or hops (suitable for use up to 110 degrees C).
$4.50
-
My Store BIAB Grain Bag - Large
These polyester brew in a bag bags are perfect for grain brew in a bag. These large Brew in a Bag Bags have a draw string and are made to line a pot up to 55cm diameter. This bag's dimensions are 60cm wide and 60cm deep and is suitable for use up to 110 degrees Celsius.
$10.00
-
My Store Easy Syphon - 45cm
Syphon your wort with no mess and minimal aeration, just drop it into your carboy, give it a quick pump and the liquid starts flowing. Due to the width and length of this syphon. Also available in size 65cm - refer Easy Syphon 65cm
$17.50
-
My Store Easy Syphon - 65cm
Syphon your wort with no mess and minimal aeration, just drop it into your carboy, give it a quick pump and the liquid starts flowing. Due to the width and length of this syphon, it is not suitable for 5L glass carboys. Also available in 45cm - refer Easy Syphon 45cm
$20.00
-
My Store Digital Pocket Thermometer
Great for accurately reading the temperature of your mash, wort, still etc
$8.50
-
Kegland Duotight 8mm x 5/8 inch Female
The thread on this fitting will suit: Standard Keg Couplers with 5/8 threadStandard tap shanks with 5/8 threadMany other home brew fittings with 5/8 Thread
$4.00
-
The Hop + Grain Dial Thermometer
$10.00
-
Kegland Stainless Stepless Clamp - 7 - 10mm line
1 x single stepless clamp. These stainless clamps are the best for securing your beer and gas line to barbs/nipples. Unlike other hose clamps they secure the line in a complete and exact circle. Hence the name “stepless” clamps. The clamps can be secured with a special crimping tool however normal wire cutters work just as well.
$0.60
-
Kegland Nylon Regulator Washer
To fit the range of MK Regulators.Plumbers tape not required. Simply screw your regulator in tightly, the washer will make a complete seal.
$0.75
-
My Store 6mm Vinyl Hose per Meter
6mm inner diameter clear vinyl hose for transferring and syphoning.
$2.75
-
My Store Plastic Jug - 5 Litre
5 litre plastic jug
$18.50
-
Generic Brand Brewing Spoon - 60cm
60cm brewing spoon, for mixing and dissolving adjuncts and extracts inside your fermenter.
$7.50
-
Kegland Duotight 8mm x 9.5mm Reducer
This reducer is suitable for beer and gas hosing in 9.5mm (3/8") OD line to 6.5mm (1/4") OD hosing reducing this down to 8mm OD beer and gas line, suitable for 4mm ID and 5mm ID x *mm OD line
$4.50
-
Kegland Temperature Controller (Double Outlet)
NOW with programmable temperature profile (step mashing and fermentation rest profiles)PLUS automated distillation control feature (switch off after reaching set temperature) These new advanced temperature controllers look very similar to our old model temperature controllers but these now include even more features. The temp controller now includes settings so you can: 1. Setup a temperature profile so you can program the temp controller to step up and down the temperature over time. For optimum fermentation conditions you can program this smart temperature controller to start fermenting at one temperature, increase the temperature after a number of days then crash chill. This is done without any intervention at all. Just set and forget. You can also use this to step up the temperature of your mash tun so it will automatically step the temperature up and down as you please. The options are endless. 2. Use this to automate you distillation column. If you have ever used a reflux still you will know how painful it is to sit there waiting and watching the still drip, drip, drip. Now this controller will look after the process for you. The controller can be used to control your reflux column so you can go and relax. Specifications: High accuracy 0.1 degree C. Dual plugs so you can control heating and cooling devices at the same time Made with 30amp cooling relay and 10amp heating relays. Rated for use with 10amp appliances. Works from -45C up to 120C Comes with fully waterproof probe so you can immerse the probe in water. Manufactured in compliance with Australian Standards
$78.00
-
My Store 10mm Vinyl Hose per Meter
10mm inner diameter clear vinyl hose for transferring and syphoning.
$4.25
-
My Store 8mm Vinyl Hose per Meter
8mm inner diameter clear vinyl hose for transferring and syphoning. Sometimes referred to as "7.9mm" inner diameter.
$3.25
-
My Store Stainless Steel Mash Paddle
This high quality stainless steel paddle is used to stir your grain when adding to your boiler as well as patting down the foam during the boil. This stainless steel paddle is preferable to plastic as it doesn't soften and warp when exposed to heat.
$25.00
-
Grainfather Grainfather Conical Condensation Jacket
Features:• Reduce condensation on the Conical Fermenter caused by low fermentation temperatures.• Made from high quality 5mm thick SBR foam.• Contains two separate removable pieces for the fermenter body and the conical cone. Please note picture shows jacket on concial fermentor, price for coat only
$39.95
-
$6.50
-
Kegland Stainless Stepless Clamp - 14 - 16mm line
1 x Single stepless clamp. These stainless clamps are the best for securing your beer and gas line to barbs/nipples. Unlike other hose clamps they secure the line in a complete and exact circle. Hence the name “stepless” clamps. The clamps can be secured with a special crimping tool however normal wire cutters work just as well.
$0.60
-
My Store 12mm Vinyl Hose per Meter
12mm inner diameter clear vinyl hose for transferring and syphoning.
$5.25
-
My Store 1/2" BSP Stainless Ball Valve Assembly
This ball valve is sold as a complete assembly so all you have to do is drill your 20mm hole in your keg, pot or vessel wall and you can fit this ball valve. This is a full port ball valve with a 14mm bore which allows maximum flow rate through the ball valve. The valve comes with Teflon tape already on the nipple, a silicon o-ring which is seated in the ½” BSP nut. The seat in the nut prevents the o-ring from rolling out of place when tightening.
$25.00
-
My Store Silicone Washer for 1/2" BSP
BSP 1 Washer for
$2.00
-
My Store 1/2" BSP Male Compression Fitting for Immersion Chiller
This compression fitting is perfect for attaching to your immersion chiller. This gives you a 1/2" BSP male thread fitting with which to attach camlocks, quick disconnects or just hose barbs to your immersion chiller.
$5.00
-
$4.95
-
My Store Plastic Jug - 3 Litre
3 litre plastic jug
$16.50
-
My Store Carboy Syphon Kit
Syphon your wort with no mess and minimal aeration, just drop it into your carboy, give it a quick pump and the liquid starts flowing. Please note you need to have gas to be able to use this syphon.
$12.50
-
Grainfather Propylene Glycol 3L
3 L of replacement food-grade propylene glycol for a Glycol Chiller.
$75.00
-
My Store GF Filter Silicone Cap
This unit can be easily dissassembled for cleaning using a phillips head screw driver.
$10.00
-
My Store Funnel - 8cm
A staple item for the kitchen and for brewing, our funnels are the right size for transferring “things” into bottles… ideal for bottling liquids, or for dosing carbonation sugar using a sugar measure. Available in 8cm and 10cm diameter.
$2.50
-
My Store Brew Pot 19l with Thermometer and Valve
Great pot for BIAB OR a great inclusion as a Hot liquor Tank or Brew Kettle in a 5-6 Gallon 3 vessel brewing system. Please email with with any enquiries about modifications or specifications. Cheers!
$140.00
-
My Store Garden Hose Quick Connect 1/2" Female
Brass construction. Fits most standard 1/2 inch garden hose quick couplings.1/2 inch BSP thread. Will also couple with 1/2 inch NPT. Includes rubber washer so no teflon tape needed.
$2.95
-
Kegland Duotight - 8mm (5/16) Ball Valve
This is an equal ball valve to take 8mm OD tubing in both sides.
$4.00
-
Kegland Duotight 6.5mm x 9.5mm Reducer
$4.00
-
Generic Brand Erlenmeyer Flask - 5L
Perfect for making yeast starters. Made from borosilicate glass that can withstand temperature changes without cracking.
$50.00
-
My Store Beer Filter System
Filtering your beer helps to get bright crystal clear beer from your tap. Comes with quality brass fittings. Easily gravity feeds, and doesn't require CO2 pressure. Use some vinyl hose to connect to the barbs and your fermenter tap. Filter cartridge is sold seperately.
$30.00
-
My Store Washable 1 Micron Filter Cartridge
10inch for compatibility PE reinforced plastic shell to protect your filter from rupturing, or physical damage. Washable (recommended wash with Sodium Percarbonate) 1 micron absolute rated for most efficient filter action. Suitable filter for our 10inch Beer Filtering System
$15.00
-
My Store Pivoting Magnetic Stir Bar
These magnetic stir bars are suited to use with our conical erlenmeyer flasks. Using a magnetic stirrer is easy and will optimise the growth of your yeast starter in the conical erlenmeyer flasks.
$5.00
-
Generic Brand Erlenmeyer Flask - 2L
Perfect for making yeast starters. Made from borosilicate glass that can withstand temperature changes without cracking.
$25.00
-
$15.00
-
Generic Brand Brewing Spoon - 39cm
39cm brewing spoon, for mixing and dissolving adjuncts and extracts inside your fermenter.
$5.00
-
My Store Brewers Paddle 45cm
50cm long plastic mashing paddle.
$4.50
-
$125.00
-
My Store Stainless Elbow 1/2 BSP Male X 1/2 BSP Female
Stainless Angle / Elbow Male to Female 1/2 inch BSP
$6.00
-
My Store 1/2" BSP - 13mm Barb fitting - Male thread
Stainless hose barb 13mm x 1/2 inch BSP Male.
$6.00
-
My Store 1500 Watt Heating Element
Weldless heater element for electric brewing systems. Requires a 20mm hole in the brewing vessel. Easy to set up, seals perfectly. These heating elements are powerful and perfect to make use on your boiler. The element is made from 304 grade stainless steel. This element is a weld free design meaning that you can easily install it by simply drilling a hole in your pot/keg/boiler of approximately 20mm and tightening a nut from the outside of the pot. The diameter of the element at the widest point is 20mm so it is ideal if you need to pass the element through the neck of a keg to make a keg boiler. This element also works extremely well with our RIMS Heat Stick Heat Exchanger Housing if you are planning on making a RIMS recirculating system. Features: Powerful 1500 Watt Thread:20mm, flange:40mm, length element only:290mm, diameter: 20mm Food grade high termperature silicone seal
$50.00
-
My Store Easy Syphon 3/8" Clip
Allows you to clip the hose or racking cane from your syphon to the edge of your fermenter or the neck of your demijohn to keep it in place at the correct depth.
$2.50
-
Mangrove Jack's Mangrove Jack's 25L Boiler
The Mangrove Jack's Beer Boiler (formerly sold as the Still Spirits T500 Boiler) is perfect for brew in a bag (BIAB) mashing, boiling for extract brewers, and also has the correct fitting for the T500 Still or the Alembic Pot Still.
$295.00
